A datum has decided to implement additional ADD sites to optimize the network utilization for ads network
traffic.
Your first step in implementing the new environment is to install a new domain controller for the Toronto
site.
You then will reconfigure the default site and assign appropriate IP address subnets to the site.
Finally, your task is to change the name of the default site to London HQ and associated with the 172.16.0.0
slash 24 IP subnet, which is the subnet range for the London head office.
The main tasks for this exercise are as follows.
One.
Install the Toronto domain controller to rename the default site.
Three.
Configure IP subnets that are associated with the default site.
Exercise one scenario task one.
Install the Toronto domain controller one on TIO RDC one Start server manager and install Active Directory
Domain Services two When the ads binaries have installed, use the Active Directory Domain Services
Configuration Wizard to install and configure TIO RDC one as an additional domain controller for a datacom
under type the directory services restore mode DSR password type password in both the password and confirm
password boxes.
Let the server restart as indicated.
Three.
After the server restarts, sign in as a date and backslash administrator.
Test to rename the default site one if necessary on low and DC one.
Open the server manager console to open Active Directory sites and services and then rename the default
first site name site to London HQ.
Three.
Verify that both ELO and DC one and two are DC one are members of the London HQ site.
Task three Configure IP subnets that are associated with the default site.
One If necessary on ELO and DC one open the server manager console and then open Active Directory sites
and services to create a new subnet with the following configuration.
Prefix 172.16.0.0 Slash 24 Site Object London HQ Exercise two Scenario.
The next step you take to implement the adds site design is to configure the new ADC site.
The first site that you must implement is the Toronto site for the North American Data Center.
The network team in Toronto also wants to dedicate a site named test site in the Toronto Data Center.
You have been instructed that the Toronto IP subnet address is 172.16.1.0 slash 24 and the Test network
IP subnet address is 172.16.100.0 slash 24.
The main tasks for this exercise are as follows.
One.
Create the ads sites for Toronto to create IP subnets that are associated with the Toronto sites.
Task one Create the ads sites for Toronto one if necessary on low and DC one.
Open the server manager console and then open Active Directory sites and services to create a new site
with the following configuration.
Name Toronto Site Link Object Default Website.
Site Link.
Three.
Create another new site with the following configuration name test site.
Site link object.
Default Web Site link.
Tasked to create IP subnets that are associated with the Toronto sites one if necessary on low and DC
one open Active Directory sites and services to create a new subnet with the following configuration.
Prefix 172.16.1.0 slash 24.
Site Object Toronto three.
Create another new subnet with the following configuration.
Prefix 172.16.100.0 slash 24 site.
Object.
Test site.
You in the navigation pane.
Click the subnets folder.
Verify in the details pane that the two subnets are created and associated with the appropriate site.
Exercise three scenario now that the ads sites have been configured for Toronto.
Your next step is to configure the site links to manage replication between the sites and then to move
the tio.
RDC one domain controller to the Toronto site.
Currently all sites belong to default website link.
You need to modify site linking so that London HQ and Toronto belong to one common site link called
Ello and TR.
You should configure this link to replicate every hour.
Additionally, you should link the test site site only to the Toronto site by using a site link named
TIO.
Our test replication should not be available from the Toronto site to the test site site during working
hours from 9 a.m. to 3 p.m..
You then will use tools to monitor replication between the sites.
The main tasks for this exercise are as follows.
One.
Configure site links between ads sites to move tio RDC one to the Toronto site.
Three.
Monitor Ads Site Replication Task one.
Configure site links between ads sites.
One.
If necessary on low and DC one.
Open Active Directory sites and services to create a new IP based site.
Link with the following configuration name.
TR Test Sites.
Toronto Test site.
Modify the schedule to only allow replication from Monday 9 a.m. to Friday 3 p.m. three.
Rename default web site link and then configure it with the following settings.
Name L0 into your site's London HQ Toronto replication every 60 minutes.
Task to move T.O., RDC one to the Toronto site one if necessary, on Aiello and DC one open Active
Directory sites and services to move to RDC one from the London HQ site to the Toronto site.
Three.
Verify the tio.
RDC one is located under the server's node in the Toronto site.
Task three Monitor Adds Site Replication one on yellow and DC one on the taskbar.
Click the Windows PowerShell icon to use the following commands to monitor site replication.
Rep Admin Slash KCC.
This command re calculates the inbound replication topology for the server.
Rep admin slash.
Show rebel.
Verify that the last replication with TLR DC one was successful rep admin slash bridge heads.
This command displays the bridge servers for the site topology rep admin slash reply summary.
This command displays a summary of replication tasks.
Verify that no errors appear.
DC Digi test replications.
Verify that all connectivity and replication tests pass successfully.
Three.
Switch to t0r dc one and then repeat the commands to view information from the r DC one perspective.
Exercise four scenario.
After AIDS sites and replication are established, a datum experiences replication issues.
You must use monitoring and troubleshooting tools to diagnose the issue and resolve it.
The main tasks for this exercise are as follows.
One Produce an error to monitor ads.
Site replication.
Three.
Troubleshoot AIDS Replication.
Four.
Prepare for the next module.
Task one.
Produce an error.
One on ELO and DC, one open server manager, and then open active directory sites and services to inactive
directory sites and services.
Replicate TLR DC one with ELO and DC one from the London HQ site.
Three.
In Windows PowerShell run.
Get it replication up to date in this a vector double targeted datum dot com four.
Observe the results and then note the date and time of the most recent replication event.
Five Go to Tio RDC one Open Windows PowerShell and then run the following Windows PowerShell Commands
CD Backslash Lab Files Backslash Mod zero four backslash mod 04x4 dot PS1 Task to monitor adds site
replication one on TLR DC one Inactive Directory Sites and services.
Replicate L1 DC one with TIO our DC one from the Toronto site.
Two on TIO our DC one in Windows PowerShell.
Run the following commits and then observe the results.
Get it replication up to date this a vector double targeted datum dotcom get add replication subnet
filter asterisk.
Get ahead.
Replication site link.
Filter asterisk.
Task three troubleshoot AIDS replication one on t0 or DC one in Windows PowerShell.
Determine the IP address settings for the computer and then run the following complete get DNS Client
Set.
DNS Client server address.
Server Addresses one set.